Contact Us:

Shaanxi DaoLin Mechanical & Electrical Co.,Ltd

Tel: +86-29-84523807-802

Fax: +86-29-84523807-808

E-mail: sales@inseals.com

Add: Room 11204, No.1 Bldg, ZhengXin Mansion, No.5 GaoXin Yi Road, GaoXin District, Xi'an City, Shaanxi Province, China

Home > Knowledge > Content
The Unbalanced mechanical seal (Part I)
Jul 03, 2018

Virtually all mechanical seals are available in either unbalanced ( Ref. Figure) or balanced versions. The term “unbalanced” is used when the stuffing box pressure times the area exposed to the pumped fluid (closing force), acting to close the seal faces, is greater than the average pressure between the seal faces (pressure gradient)times the area of contact between the faces. In other words, unbalanced mechanical seals exhibit net hydraulic closing forces which are generated by the actual pressures to be sealed.


unbalanced-seal.png


For example, if there were a stuffing box pressure of 50 psig (3.4barg), the spring load would have to be added. Hence, the “face load” or closing force on the faces would be even higher than 50 psig times the face area. This, of course, limits the pressure sealing capacity of an unbalanced seal.


Unbalanced seals are often more stable than balanced seals when subjected to vibration, misalignment, and cavitation. The disadvantage is their relatively low-pressure limit. If the closing force exerted on the seal faces exceeds the pressure limit, the lubricating film between the faces is squeezed out and the highly loaded dry running seal fails.



Contact Us:

Shaanxi DaoLin Mechanical & Electrical Co.,Ltd

Room1107, Building B, Sail Times Plaza, Hou Wei Zhai, Wei Yang 

District, 710085, Xi’an  City, Shaanxi Province, China

Tel.:+86(029)84523807-802 Fax: +86(029)84523807-808

Email: sales@inseals.com

www.inseals.com





Previous: Mechanical seals: How to Choose O-ring?(II)

Next: Mechanical seals: How to Choose O-ring?(I)